Mauch 053: Power-Cube 3 V3 / 2x 5.3V + 1x 12.0V @10A
Input: 4-14S LiPo (60V max)
- POWER1: 5.3V @ 10A
- POWER2: 5.3V @ 10A
- “12.0V”: 12.0V @ 10A
Click here to customize POWER2 and “12.0V” outputs (can be between 3.3V and 12.0V)
Lead-time for customized parts is approximately 4 weeks
- 1x Power-Cube 3 V3 with CFK enclosure and fan
- 1x 040: sensor cable
Molex CLIK-Mate 1.25mm 4p on both ends / L = 150mm
- 1x 060: power cable for Pixhawk 2.1
Molex CLIK-Mate 2.0mm 6p on both ends / L = 200mm
- 1x 061: backup power cable for Pixhawk 2.1
Molex CLIK-Mate 2.0mm 6p to Molex CLIK-Mate 2.0mm 6p + 1x JR servo / L = 200mm
- 1x 063: 12.0V output cable
Molex CLIK-Mate 2.0mm 6p to 3x JR servo / L = 200mm
Delivery without 059: Power-Cube V3 Switch. Please order separately if required.
Dimensions and weight:
- 84 x 58 x 24mm / 86g with enclosure and fan
- Cooling fan size: 40 x 40 x 6mm
Important operating recommendations:
Please review the Mauch warranty for returns and replacements.
- Only use high quality anti-spark plugs.
- Never use a PSU.
- Don’t use the power supply on high inductive loads, such as DC motors
(max output to power brushed or brushless DC motors is 5A).
- Input must be at least 3V higher than output!
Available on backorder!