Mauch 003: PL-200 Current and Voltage Sensor Board 200A


Measures currents up to 200A and voltages up to 14S (max. 60V) with solder bridge open and up to 7S (max. 30V) with solder bridge closed

What’s included:

  • 1x 200A current and voltage measurement sensor, based on Allegro Hall Sensor ACS758-200U, 2x 10cm 10AWG wires (red), Molex CLIK-Mate 1.25mm 4p connector
  • 1x CFK enclosure

Does not include sensor cable (sensor cable supplied with the BEC)
If you want to use your own BEC (4.95-5.05V), also order a 040: Sensor cable

Dimensions and weight:

  • 27.5 x 19.5 x 10.5mm / 22g without enclosure
  • 43.5 x 23.0 x 15mm / 27g with enclosure
Please review the Mauch warranty for returns and replacements.

In stock


Additional information

Weight 1.5 oz
Dimensions 2.5 × 2.5 × 0.75 in