Mauch 059: Power Switch for Power Cube and PDB
This switch connects to any Power-Cube “V3” or PDB and allows manual power on/off (current consumption when “off” is minimal). It isn’t just a “switch”: there’s a small PCB inside with current control mode. The 3D printed mount can be removed.
- 1x Power-Switch with 200mm connection cable
- 1x ABS switch mount
- 2x M3x10 mounting screws and nuts
- 1x spare Molex housing 6p – 1.25mm
In stockPlease review the Mauch warranty for returns and replacements.