• August 11, 2019 at 3:10 am #23240

    Hey People,

    i’ve bought the FlighDeck lua app for my old Taranis X9D without “+” 😉
    Mavlink is working over TBS Crossfire. GPS, Angles and Voltages showing correct on Telemetry but FlightDeck is always showing “waiting for your…”
    Any suggestions for my setup?


    August 13, 2019 at 1:17 pm #23266
    Florent Martel

    Hi Matthias,

    FlightDeck is unfortunately not compatible with Crossfire because the data on Crossfire is not in the correct format. FlightDeck uses the native passthrough FrSky telemetry, whereas Crossfire converts Mavlink into native standard FrSky telemetry, which contains much less information: http://ardupilot.org/copter/docs/common-frsky-telemetry.html#protocol-information

    One way to fix this is if Crossfire had a straight up serial passthrough option that passes data not to the bluetooth module but to the pins of the transmitter module into the SPort of the Taranis, which is a mode not currently supported by Crossfire. Another option would be to code Crossfire support into ArduPilot.

You must be logged in to reply to this topic.