059: Power Switch


This switch connects to any Power-Cube “V3” and acts like an manual power on/off control. For example, this is very useful when your vehicle is sitting idle and you don’t want to consume battery from your equipment. (Current consumption when “off” is minimal)

It isn’t just a “switch”. There is a small PCB included into the main wire which implements an current control mode, rather than a simple on/off.

The switch has already an installed 3D printed holder, which can be screwed down to the main frame. If this holder is not required, then please remove the Molex 6p housing and remove the holder. Then reinsert the cables back into the housing. If in any circumstances the housing get’s damaged, then there is a spare housing in the package included.

Scope of delivery:

1x Power-Switch with 200mm connection cable

1x Switch holder ABS

2x M3x10 mounting screws incl. nuts.

1x Spare Molex housing 6p – 1.25mm

In stock

Please review the Mauch warranty for returns and replacements.


There are no reviews yet.

Be the First to Review “059: Power Switch”