• June 18, 2018 at 8:19 am #12534
    robaumgartner
    Participant

    I have been successfully using FlightDeckQ with the R9 connected to a Pixhawk 2.1 and one MLVSS sensor

    but The voltage showed came from Ardupilot, not from MLVSS sensor, how can I change to see the MLVSS from the sensor ?

    Thanks!

    June 18, 2018 at 10:49 am #12538
    Florent Martel
    Keymaster

    You have to perform sensor discovery while the system is running so that “Cels” (which represents the MLVSS sensor) becomes listed and accessible to FlightDeck.

    You can refer to the “Sensor configuration” section of the manual (p.7) for more details.

    June 18, 2018 at 12:34 pm #12539
    robaumgartner
    Participant

    ok Thanks. I will try.

You must be logged in to reply to this topic.