• January 22, 2017 at 4:49 am #3608
    Tim
    Participant

    Hi, If I upgrade AurduPlane from 3.7.1 to 3.8.0beta will all the parameters be lost? Would I need to autotune, calibrate imu, compass, airspeed sensor etc?

    I have quite a complicated setup with sonar rangefinder, dual GPS, gimbal and custom double ailerons which has taken a while to get right but I’d also like to use Flight Deck.

    I gather everyone here has been through the upgrade, any problems just backing up the parameters and uploading to the new firmware?

    Thanks, Tim

    January 22, 2017 at 1:47 pm #3612
    Florent Martel
    Keymaster

    Hi Tim

    I always recommend making configuration backups part of routine procedures (essentially, whenever there is a configuration change or a firmware upgrade). I haven’t had problems importing the parameters back. The main point to know is that there are typically new parameters introduced in a new version, so it would be good to go through them to see which ones may need to be modified.

    January 24, 2017 at 9:05 am #3623
    Tim
    Participant

    Thanks Florent. I’ve backed-up the parameters and will try updating later this week, after this job.

You must be logged in to reply to this topic.