• July 26, 2017 at 7:41 am #7053
    Jennifer
    Guest

    Hi,

    I would like to connect two 6S LiPo batteries in series as 12S.

    the following are the parts i have

    – Pixhawk 2.1

    – 1 x Enclosure for Sensor Hub X2
    http://www.mauch-electronic.com/apps/webstore/products/show/6627030

    – 1 x 4 – 14S HYB – BEC / 5.3V DF – 13 – 4P
    http://www.mauch-electronic.com/apps/webstore/products/show/6626846

    – 2 x HS – 100 – HV
    http://www.mauch-electronic.com/apps/webstore/products/show/6626792

    Note: the two Power modules have the following markings at the circuit boards

    1) 100A
    2)
    ACS 758
    LCB – 100V
    73500AA
    1511
    SN: ME – 80185

    and it has SN: ME 80186 & 80185 at each power modules

    Please guide me on how to make a series circuit with 2 6S LiPo batteries.

    Anticipate your soonest reply.

    Thank you.

    Regards.
    Jennifer Liu
    +65 9127 0481

    July 26, 2017 at 8:49 am #7056
    Florent Martel
    Keymaster

    Hi Jennifer,

    This is definitely feasible by just putting the two batteries in series (current flowing through each battery is the same) which would transform the battery into a 12S. A 12S battery only needs one HV current sensor.

    Please contact the manufacturer directly if you have more detailed questions.

You must be logged in to reply to this topic.