• July 12, 2018 at 8:22 am #12730

    I have setup the C&T telemetry cable to Pixhawk 2 and Frsy X8R receiver and FlightDeck running on my Taranis 9D+. All works great and super valuable to get telemetry on the radio screen. Planning on getting the FRSKY R9M module. Anyways: I would like to get the telemetry MAVLINK feed from my Taranis, to a close by tablet or PC running a ground station. I think the TBS Crossfire TX has a Bluetooth module that can do just that. Could the serial port in the battery bay be used?

    July 12, 2018 at 2:39 pm #12734
    Florent Martel

    Hi Luc,

    The FrSky link is not capable of supporting the MAVLink protocol because of the limited bandwidth. A native FrSky protocol is used instead.

    TBS Crossfire does not support native FrSky telemetry.

You must be logged in to reply to this topic.