• March 2, 2020 at 4:52 am #29290
    Kim Clarke

    Hi Florent.
    Have come across an issue that we have been living with but would like to fix. We are running an X9D+ on OpenTx 2.3.5 and the new ACCST 2.0 Update. We were running Flightdeck 3.3.3 when I noticed that when we went into the Configuration Screen we could not escape out of it to get back to the main Telemetry Screen. The only way to do so was to turn Tx off. So I thought I would upgrade to Flightdeck 3.5.0 which I have done so just now only to find we have the same issue. This issue only started after we went to OTx 2.3.5. Any thoughts?

    Thanks Kim

    March 2, 2020 at 10:12 am #29295
    Florent Martel

    Hi Kim,

    Thanks for bringing this up. Unfortunately, this is a bug in 2.3.5 that is already fixed in the master code base, and most likely in the next release of OpenTX: https://github.com/opentx/opentx/pull/7356

    We strongly recommend you skip 2.3.5, which was released mainly because of critical issues found in Horus transmitters.

    March 2, 2020 at 1:27 pm #29309
    Kim Clarke

    Hello Florent
    Thank you again for the prompt response. OK I understand and will rectify.
    Regards Kim

You must be logged in to reply to this topic.