• March 7, 2019 at 10:59 am #16693
    ronald.roger
    Participant

    I just set up one of my planes to use Flight Deck and am impressed enough that I’m working on updating the rest of my fleet.

    What cable is the best match for an mRo x2.1 controller? I’m guessing that the “single pin” cable is the best option?

    RR

    March 7, 2019 at 12:59 pm #16706
    Florent Martel
    Keymaster

    Hi Ronald,

    You can use a Pixhawk 2 telemetry cable if you’re ok with connecting to TELEM1 which is typically for the MAVLink radio, but if you use such a radio your best option as you say is to use a Single Pins telemetry cable which would allow you to connect to the serial ports labeled in the documentation as “Telemetry 2” (SERIAL2), “OSD” (SERIAL4), or “Debug” (SERIAL5).

    Source: https://docs.px4.io/en/flight_controller/mro_x2.1.html

You must be logged in to reply to this topic.

Topic Tags